Sumber terbuka Humanoid
Humanoid Poppy
Salah satu humanoid sumber terbuka pertama yang sepenuhnya dicetak 3D, dimulai pada tahun 2013 oleh tim Inria’s Flowers: 83 cm, 25 DoF dengan tulang belakang yang terinspirasi dari bio 5-DoF, untuk pendidikan, penelitian, dan seni.
- Tipe
- Humanoid
- DoF
- 25 (termasuk tulang belakang 5-DoF)
- Tinggi
- 83 cm
- Berat
- 3,5kg
- Biaya pembangunan
- ≈ US$8.000–9.000
- Struktur
- cetakan nilon SLS
- Buka perangkat keras dan buka kode
- Bill of material lengkap dengan tautan pemasok
- Tautan langsung ke CAD, kode, dan kertas asli
01 — Detail proyek
Ikhtisar, BOM, dan sumber daya
Overview
Poppy Humanoid is one of the earliest complete 3D-printed open-source humanoids. Its signature is a 5-motor bio-inspired spine and human-like hips with thighs angled 6° inward, giving it a more natural gait.
It uses ROBOTIS Dynamixel servos and the Python library pypot; an experienced builder assembles it in about 7 hours.
Key specifications
| Actuators | 19 × MX-28AT, 4 × MX-64AT, 2 × AX-12A (ROBOTIS Dynamixel) |
|---|---|
| Computer | Raspberry Pi 3/4 (early builds: Odroid U3 / XU4) |
| Sensors | Wide-angle HD camera; optional 9-DoF IMU and 4.5" screen |
| Cost | About 60% goes to the 25 Dynamixels |
Bill of materials
The official BOM lists parts and quantities only; a full build is about US$8,000–9,000, roughly 60% of it servos.
| Part | Model / spec | Qty | Link |
|---|---|---|---|
| 3D printing | |||
| leg | 2 | ||
| thigh_right | 1 | ||
| thigh_left | 1 | ||
| hip_right | 1 | ||
| hip_left | 1 | ||
| pelvis | 1 | ||
| simple_foot_left | 1 | ||
| simple_foot_right | 1 | ||
| hip_z_to_hip_y-connector | 2 | ||
| double_rotation_MX64_link | 2 | ||
| i101-Set_to_MX64_link | 1 | ||
| abdomen | 1 | ||
| spine | 1 | ||
| double_rotation_MX28_link | 2 | ||
| i101-Set_to_MX28_link | 1 | ||
| chest | 1 | ||
| shoulder_right | 1 | ||
| shoulder_left | 1 | ||
| arm_connector | 2 | ||
| upper_arm | 2 | ||
| forearm_left | 1 | ||
| forearm_right | 1 | ||
| hand_right | 1 | ||
| hand_left | 1 | ||
| neck | 1 | ||
| head-back | 1 | ||
| head-face | 1 | ||
| support_camera | 1 | ||
| screen | 1 | ||
| hide-screen | 1 | ||
| speaker_left | 1 | ||
| speaker_right | 1 | ||
| fake_manga_screen | 1 | ||
| Electronics | |||
| USB2AX | 2 | ||
| Hardkernel Odroid U3 | |||
| 8GB eMMC Module U Linux | |||
| Cooling Fan U3 (Optionnal) | |||
| USB hub: here ou [here][8] | |||
| DC Plug Cable Assembly 2.5mm | |||
| 5V DC convertor | adafruit.com ↗ | ||
| speakers | 2 | ||
| ampli stereo | adafruit.com ↗ | ||
| Nano Wifi Dongle | amazon.fr ↗ | ||
| 2.0 Megapixels "Videw" Camera with OV2643 CMOS sensor equipied with FOV 120° or 170°!! + USB cable | alibaba.com ↗ | ||
| Sparkfun Razor 9DoF IMU (Optionnal) | |||
| Manga Screen (Optionnal) | kickstarter.com ↗ | ||
| Robotis | |||
| MX-28AT | 19 | ||
| MX-64AT | 4 | ||
| AX-12A | 2 | ||
| HN07-N101 set | 19 | ||
| HN07-i101 Set | 12 | ||
| HN05-N102 Set | 4 | ||
| HN05-i101 Set | 4 | ||
| Wrench Bolt M23 (200 pcs) | 1 | ||
| Wrench Bolt M2.54 (200 pcs) | 1 | ||
| Wrench Bolt M2.56 (200 pcs) | 1 | ||
| Wrench Bolt M2.58 (200 pcs) | 1 | ||
| BIOLOID Bolt Nut Set BNS-10 | 1 | ||
| Nut M2.5 (400 pcs) | 1 | ||
| N1 Nut M2 (400 pcs) | 1 | ||
| SMPS2Dynamixel | 3 | ||
| SMPS 12V 5A PS-10 | 1 | ||
| BIOLOID 3P Extension PCB | 3 | ||
| Robot Cable-3P 60mm 10pcs | 1 | ||
| Robot Cable-3P 100mm 10pcs | 1 | ||
| Robot Cable-3P 140mm 10pcs | 1 | ||
| Robot Cable-3P 200mm 10pcs | 1 | ||
| cable-3P 22cm | 3 | ||
| cable-3P 25cm | 3 | ||
| cable-3P 50cm | 2 | ||
| Cable-4P 200mm avec fils D+/D- coupés | 2 | ||
| Head option A (current docs) | |||
| Raspberry Pi 3 + SD card | 1 | ||
3D printing & fabrication
- Official parts are white polished polyamide (SLS nylon) with a clear resin screen — ideal for an online 3D-printing service.
- No FDM settings are published; on a desktop printer, use thicker walls and more infill for strength.
- STL, STEP and SolidWorks files are on the GitHub releases page.
CAD, code & papers
Get the large files — CAD, STL, STEP and code — straight from the original project:
- Poppy project on GitHub ↗github.com
- GitHub ↗github.com
- CAD & STL releases ↗github.com
- Assembly guide ↗github.com
- Control library pypot ↗github.com
- Paper (2013) ↗flowers.inria.fr
- Paper (Humanoids 2014) ↗flowers.inria.fr
License
Hardware CC BY-SA 4.0; software GPL v3.
Image credits
- Image 1: Inria / Poppy-project.org / Photo H. Raguet. · CC BY-SA 4.0 — source ↗
- Image 2: Inria / Poppy-project.org / Photo H. Raguet. · CC BY-SA 4.0 — source ↗
- Image 3: Inria / Poppy-project.org / Photo H. Raguet. · CC BY-SA 4.0 — source ↗
- Image 4: Inria / Poppy-project.org / Photo H. Raguet. · CC BY-SA 4.0 — source ↗
- Image 5: Inria / Poppy-project.org / Photo H. Raguet. · CC BY-SA 4.0 — source ↗
- Image 6: Poppy Project / Inria Flowers · CC BY-SA 4.0 — source ↗
- Image 7: Poppy Project / Inria Flowers · CC BY-SA 4.0 — source ↗
Sumber: Gambar dan data: Poppy Project / Inria Flowers (situs web, GitHub, panduan perakitan, dan makalah). Perangkat keras CC BY-SA 4.0, perangkat lunak GPL v3; “Poppy” adalah merek dagang terdaftar. Situs ini tidak berafiliasi dengan proyek aslinya.
Dapatkan suku cadang
Di mana mendapatkan suku cadangnya
Setiap baris di BOM tertaut ke pemasok yang digunakan tim asli. Butuh bantuan untuk mencari suku cadang atau mencetak strukturnya dengan pencetakan 3D? Beri tahu kami robot mana yang sedang Anda buat.
02 — Robot terkait
Lebih banyak robot sumber terbuka
Bangun bersama kami